Let me guess. You’ve scrolled past those gorgeous crochet houseplants on Instagram and thought, “There’s no way I could make that.” The fenestrations look complicated. You’ve never crocheted anything that wasn’t flat. You’re sure you’d end up with a sad, floppy leaf that looks nothing like the photo. I’m here to tell you that you absolutely can make this navy blue velvet monstera. Every leaf uses basic stitches you already know. The split-leaf holes are just strategic chains and skipped stitches. The pot is simple increases in the round. If you can single crochet and chain, you can create this entire botanical masterpiece.
Why Crochet a Monstera Plant?
This pattern solves so many problems at once. You get the trendy houseplant look without the guilt when you forget to water it. It’s pet-safe, kid-proof, and thrives in those dark corners where real plants would give up.
The navy blue colorway makes this version especially striking. Instead of copying nature exactly, we’re leaning into the craft and creating intentional home décor. The deep blue pairs beautifully with teal stems for a moody, sophisticated vibe that works in modern spaces. It also makes an incredible gift—housewarming presents, birthdays for the friend who kills every plant, or a Mother’s Day gift that lasts forever.
Skill Level
Intermediate beginner to intermediate. You should feel comfortable with basic stitches and working in the round. The leaves need some shaping and attention to stitch placement, but nothing here is truly advanced. If “increase” and “back loop only” don’t scare you, you’re ready.
Finished Dimensions
The completed plant stands about 14 to 16 inches tall from the base of the pot to the tallest leaf tip. Individual leaves measure roughly 5 to 7 inches long depending on the size variation you choose. The pot measures approximately 4 inches tall and 4 inches in diameter at the rim.
Materials Needed
Here’s everything you’ll gather:
- Yarn: 200–250 yards of navy blue worsted weight for the leaves and pot (cotton or cotton blend gives the best stitch definition). 75–100 yards of teal or dark green for the stems. Optional small amount of contrasting yarn for lattice detail on the pot.
- Hooks: 4.0 mm (G/6) for leaves and pot. Optional 3.5 mm (E/4) for tighter stems.
- Notions: Tapestry needle, 18- or 20-gauge floral wire (6–8 pieces about 12 inches long), wire cutters, polyfill stuffing, a small plant pot or weighted base about 3.5 inches in diameter, stitch markers, scissors.
That’s the full list. Nothing exotic beyond the floral wire.
<dialogrender_generated_imageprompt isHyper-detailed 8K product photo of navy blue and teal worsted weight yarn skeins on a light wooden table next to a 4.0mm and 3.5mm crochet hooks, floral wire pieces, wire cutters, polyfill, tapestry needle, stitch markers and scissors, soft natural daylight, sharp focus on yarn texture and deep blue color, professional styling, no text orientation islandscape>
Abbreviations and Stitch Definitions
Quick reference so nothing slows you down:
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – increase (2 stitches in one)
- dec – decrease (single crochet two together)
- sk – skip
- BLO – back loop only
- st(s) – stitch(es)
- rep – repeat
You already know most of these. The fenestrations are just chains and skipped stitches—nothing fancy.
The Monstera Leaf Pattern
You’ll make 6 to 8 leaves in varying sizes for a full, lush plant. The instructions below are for a medium leaf. For smaller leaves, reduce the starting chain by 4–6 stitches. For larger ones, add 4–6 stitches. The method stays the same.
Leaf Body (Make 6 to 8)
Work flat in rows. Start with a foundation chain and build the width with a few increase rows. Create the iconic fenestrations by chaining and skipping stitches on specific rows, then working single crochets into those chain spaces on the next row. After the second set of holes, begin decreasing every other row until you reach the tip. Finish by decreasing down to a single point and fastening off with a long tail.
<dialogrender_generated_imageprompt isHyper-detailed 8K close-up of a navy blue crochet monstera leaf showing the fenestration holes created by chain spaces and skipped stitches, soft side lighting highlighting the openwork details and stitch definition, sharp focus on the leaf texture, professional crochet photography, clean background, no text orientation isportrait>
Leaf Edging
Join yarn at the base and single crochet evenly around the entire perimeter. Work about two single crochets per row end along the sides and three single crochets at the tip for a smooth curve. This finished edge helps the leaf hold its shape.
Central Vein Detail
Using a tapestry needle and the same navy yarn, embroider a raised central vein from base to tip with chain stitch or surface slip stitch. This simple detail mimics the natural structure of real monstera leaves and adds beautiful texture.
Stem Pattern (Make 6 to 8)
The stems are simple tubes worked in a continuous spiral around floral wire for stability. Start with a magic ring of six single crochets and continue in the round until the stem measures 6–8 inches (or whatever lengths you want for a natural look). Vary the heights so the finished plant doesn’t look too uniform.
Wire Insertion
Cut a piece of floral wire two inches longer than the stem and insert it through the center of the tube. The extra length pokes into the pot base for stability. Sew the leaf base securely to the top of the stem, wrapping a few times for strength.
<dialogrender_generated_imageprompt isHyper-detailed 8K step-by-step photo of hands inserting floral wire into a teal crochet stem tube and attaching a navy blue monstera leaf to the top, soft natural light, realistic yarn and wire texture, instructional style, no text orientation islandscape>
Pot Cover Pattern
Base
Work in joined rounds, increasing evenly from a magic ring until the base fits your pot diameter (usually 48–54 stitches for a 4-inch pot).
Sides
Work a few rounds in the back loop only for a crisp edge at the base, then continue in regular single crochet until the sides reach the desired height.
Lattice Detail (Optional)
The sample shows a diamond lattice. You can create a mesh overlay with chain spaces or use surface crochet to add crossed lines after the solid pot is finished. For a simpler version, skip the lattice entirely—the solid navy pot looks beautiful on its own.
Rim
Finish with a gentle scalloped edge by mixing single crochet, half double crochet, and double crochet around the top. Fasten off and weave in the ends.
<dialogrender_generated_imageprompt isHyper-detailed 8K photo of the finished navy blue crochet pot cover with optional lattice detail and scalloped rim, soft diffused lighting highlighting the texture, clean background, professional product photography, no text orientation isportrait>
Assembly Instructions
Insert the weighted pot or small container inside the crochet cover and add polyfill around the sides for a snug fit. Fill the center with polyfill, crumpled paper, or floral foam so the stems have something to grip. Push the wire-reinforced stems into the filling at varying heights and angles. Gently bend and shape the leaves—real monstera leaves droop and curve, so give yours some movement. Step back, adjust the fullness and balance, and admire your work.
<dialogrender_generated_imageprompt isHyper-detailed 8K photo of a finished navy blue velvet monstera crochet plant standing in its textured pot, showing multiple leaves with fenestrations, teal stems, and natural arrangement, soft diffused lighting highlighting the deep blue color and dimensional leaves, clean white background, professional product photography, no text orientation isportrait>
Tips for Success
Keep tension a little firm on the leaves so they hold their shape. If they feel floppy, drop a hook size.
Don’t stress about making every leaf identical—real monstera leaves aren’t perfect either, and variation makes the plant look more organic. Wet-block the leaves by pinning them flat if you want crisper edges. Use quality floral wire; flimsy wire won’t support the leaves over time.
FYI, the second and third leaves always go faster once the fenestration rhythm clicks.
Customization Ideas
This pattern is endlessly adaptable. Make it in classic green for a realistic look, variegated yarn for a trendy half-moon effect, multiple colors for a rainbow botanical display, or cream for minimalist décor. Adjust the pot size, add extra leaves for more fullness, or create a whole collection of crochet houseplants using the same techniques.
IMO, the navy blue is what makes this version feel like intentional home décor instead of a plant replica. Don’t be afraid to go bold.
FAQ’s
Can a confident beginner really make the fenestrations?
Yes. The holes are just chains and skipped stitches on specific rows. Once you do the first one, the rest feel straightforward.
How long does the whole plant usually take?
Most makers finish in a few focused sessions. The leaves are the main time investment; the stems and pot work up quickly.
Do I really need floral wire?
Yes if you want the leaves to hold their shape and pose. Without it the plant will look floppy. Quality 18- or 20-gauge wire is worth the small investment.
Can I skip the lattice on the pot?
Absolutely. The solid navy pot looks clean and modern on its own. The lattice is just an optional decorative extra.
Will the leaves stay upright over time?
With proper wire and a slightly firm tension, yes. Bend them gently into natural curves and they’ll hold their positions.
Conclusion
This navy blue velvet monstera proves that a never-needs-watering houseplant can still feel special and handmade. The split-leaf fenestrations, wire-reinforced stems, and textured pot come together into a piece that looks intentional and lasts forever. Grab that deep blue yarn, start with one leaf, and get ready for the “wait, you made that?” compliments. Happy crocheting!
